Author Topic: AATW... failures..  (Read 4552 times)

Offline CrestonFS

  • 360 & NATW
  • **
  • Posts: 84
  • Reputation: 232
    • View Profile
AATW... failures..
« on: Dec 17, 2010, 11:49: AM »
Hey guys i have been attempting AATW.. (no success) and i can't seem to find out what im doing wrong..

SOOOOO

i posted a couple of my attempts. They all look like this so if you have ANY advice please help. Im going crazy.

AATW help

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


Offline Obi3

  • ATW & Crossover
  • *
  • Posts: 43
  • Reputation: 192
    • View Profile
Re: AATW... failures..
« Reply #1 on: Dec 17, 2010, 06:12: PM »
this is what exactly happens with me..I also need help with this

Offline CrestonFS

  • 360 & NATW
  • **
  • Posts: 84
  • Reputation: 232
    • View Profile
Re: AATW... failures..
« Reply #2 on: Dec 17, 2010, 06:17: PM »
i was lucky enough to get aatw inside off a bounce.. but complete failure with aatw outside... so ya.. please someone help lol

Offline Blazej

  • New Shit
  • ****
  • Posts: 664
  • Reputation: 950
    • View Profile
Re: AATW... failures..
« Reply #3 on: Dec 17, 2010, 06:29: PM »
imo you just kick the ball too low and you don't have the time to start atw properly, so just set the ball higher

Offline Juri

  • 360 & NATW
  • **
  • Posts: 79
  • Reputation: 196
    • View Profile
Re: AATW... failures..
« Reply #4 on: Dec 17, 2010, 08:05: PM »
From a far view, this guy looks like Gunther without weight training ^^
Just practise, it's all about timing. And like Blazej said, kick the ball a bit higher.
i was lucky enough to get aatw inside off a bounce.. but complete failure with aatw outside... so ya.. please someone help lol
Normally Inside Aatw is harder than outside, I'm sure u will get this trick next training sessions :)

Offline CrestonFS

  • 360 & NATW
  • **
  • Posts: 84
  • Reputation: 232
    • View Profile
Re: AATW... failures..
« Reply #5 on: Dec 18, 2010, 04:13: AM »
From a far view, this guy looks like Gunther without weight training ^^
Just practise, it's all about timing. And like Blazej said, kick the ball a bit higher.
i was lucky enough to get aatw inside off a bounce.. but complete failure with aatw outside... so ya.. please someone help lol
Normally Inside Aatw is harder than outside, I'm sure u will get this trick next training sessions :)

i was told it was harder doing inside aatw too, but i haven't even gotten close to getting aatw out.. (and thats the one i want to learn so i can get timo and beck atw in the future)

Offline papu

  • 360 & NATW
  • **
  • Posts: 145
  • Reputation: 288
    • View Profile
Re: AATW... failures..
« Reply #6 on: Dec 18, 2010, 04:28: AM »
i have done aatw inside first than outside-.... its easy this way i think---

Offline Tupac

  • APATW & PMATW
  • *****
  • Posts: 5,031
  • Reputation: 2790
  • Merry Christmas!
    • View Profile
Re: AATW... failures..
« Reply #7 on: Dec 18, 2010, 05:00: AM »
At first i blew at the aatw too.

It's really awkward, but I think I might have figured it out. (keywords are "might have")

You're trying to do it in 2 different steps. You have to do it in one fluent motion.
Too break it down a bit more, Don't do reverse co AND THEN go for the atw. My point is you look like your hesitating on the atw part.
You can't think of it as reverse co-atw nt. Think of it as one motion. It helped me out a lot. May not work for you though... Try it though, you never know!
BONER!

Offline walter

  • 360 & NATW
  • **
  • Posts: 100
  • Reputation: 247
    • View Profile
Re: AATW... failures..
« Reply #8 on: Dec 18, 2010, 08:18: AM »
At first i blew at the aatw too.

It's really awkward, but I think I might have figured it out. (keywords are "might have")

You're trying to do it in 2 different steps. You have to do it in one fluent motion.
Too break it down a bit more, Don't do reverse co AND THEN go for the atw. My point is you look like your hesitating on the atw part.
You can't think of it as reverse co-atw nt. Think of it as one motion. It helped me out a lot. May not work for you though... Try it though, you never know!
it isn't reverse co-atw nt
My Youtube Channel
http://www.youtube.com/user/WalterPineFS
My Latest Video

Offline L_I_S

  • Moderator
  • APATW & PMATW
  • ****
  • Posts: 5,118
  • Reputation: 6249
    • View Profile
Re: AATW... failures..
« Reply #9 on: Dec 18, 2010, 10:25: AM »
At first i blew at the aatw too.

It's really awkward, but I think I might have figured it out. (keywords are "might have")

You're trying to do it in 2 different steps. You have to do it in one fluent motion.
Too break it down a bit more, Don't do reverse co AND THEN go for the atw. My point is you look like your hesitating on the atw part.
You can't think of it as reverse co-atw nt. Think of it as one motion. It helped me out a lot. May not work for you though... Try it though, you never know!
it isn't reverse co-atw nt
That's what he said lol

yes it is? lol what is it then?
Aatw is aatw.
« Last Edit: Dec 18, 2010, 11:19: AM by L_I_S »
http://www.youtube.com/user/LISdafreestyler
-Don't break combos.
-Don't use crossovers to save combos.
-If you're a new freestyler looking to improve, check the stickys in the help and advice section.
-Send me a personal message if you see spam.

Offline ningja

  • 360 & NATW
  • **
  • Posts: 60
  • Reputation: 169
    • View Profile
Re: AATW... failures..
« Reply #10 on: Dec 18, 2010, 10:58: AM »
i landed that and timo not long ago, you need to move your weak foot faster so you pretty much land on it as you do the atw with your strong foot

Offline Tupac

  • APATW & PMATW
  • *****
  • Posts: 5,031
  • Reputation: 2790
  • Merry Christmas!
    • View Profile
Re: AATW... failures..
« Reply #11 on: Dec 18, 2010, 11:47: AM »
At first i blew at the aatw too.

It's really awkward, but I think I might have figured it out. (keywords are "might have")

You're trying to do it in 2 different steps. You have to do it in one fluent motion.
Too break it down a bit more, Don't do reverse co AND THEN go for the atw. My point is you look like your hesitating on the atw part.
You can't think of it as reverse co-atw nt. Think of it as one motion. It helped me out a lot. May not work for you though... Try it though, you never know!
it isn't reverse co-atw nt
  :rolleyes: That's exactly what I said!  :PDT_Armataz_01_37: You are such a genius!
BONER!