Author Topic: RBSS Monta ball petition  (Read 22585 times)

Offline Miran Pirner

  • Moderator
  • APATW & PMATW
  • ****
  • Posts: 2,735
  • Reputation: 4636
    • View Profile
RBSS Monta ball petition
« on: Sep 06, 2011, 07:47: AM »
With last year's flop of a "ball" Monta made for RBSS in mind, what are your thoughts on making a petition in the hope of Monta and Red Bull finally getting the point and Monta making a ball that's worthy of being used for this competition.

I know it's a big of a long shot, seeing as neither RB nor Monta actually give a fuck about what the freestylers want, but if we don't take initiative & raise our voices, nothing will ever happen.

Also, would be great if everyone could put some feedback into what kind of ball they'd like. Keep in mind that answers like "Adidas matchball" are out of the question for obvious reasons (too expensive).

I'll start:
- the least that could be done is to make the current ball a size 5 (69-71 cm circumference)
- I'd be more than satisfied if they made a ball like the one that was used for RBSS 2008 (http://ak.buy.com/PI/0/500/208457094.jpg)

That kind of ball is cheap to make, but good for FS, no matter what type of tricks you're performing - lowers, uppers, sits, grounds, blocking/magnetic, etc.
www.miranpirner.com
www.youtube.com/MxP23
To learn to succeed, you must first learn to fail.
It's what you do that counts, but it's how you do it which separates you from the rest.
You can't have creativity unless you leave behind the bounded, the fixed, all the rules.

Offline TF

  • Freestyle Moderator
  • PATW & LTATW
  • ****
  • Posts: 1,659
  • Reputation: 2162
    • View Profile
Re: RBSS Monta ball petition
« Reply #1 on: Sep 06, 2011, 10:22: AM »
I think this is a serious issue and action should definitely be taken. The last ball was without a doubt one of the worst I have ever used. It took a very long time to get used to which meant that when the competition was over, it took even longer to get back to using a size 5.

In regard to what ball I feel would be best, the recent cheap nike balls are very good in my opinion. http://media.scoreboardsports.net/media/catalog/product/cache/6/image/9df78eab33525d08d6e5fb8d27136e95/n/i/nike_ball2.jpg They are a decent weight, last for a reasonable amount of time, have brilliant grip and are very cheap.

Honestly I think it will be very hard for us to make any sort of impact seeing as the main aim for Monta and Red Bull is naturally to accumulate revenue, rather than attempting to cater to the specific desires of the freestylers. However, it is definitely worth while giving it a go!

A few queries for me though:

How would we produce evidence that a substantial amount of freestylers see this as an important issue?

Even if we are successful, how do we ensure that the ball is manufactured correctly?

Who would we send this petition to?

   

Offline Miran Pirner

  • Moderator
  • APATW & PMATW
  • ****
  • Posts: 2,735
  • Reputation: 4636
    • View Profile
Re: RBSS Monta ball petition
« Reply #2 on: Sep 06, 2011, 10:54: AM »
Thanks for the support Tom!

To answer your questions: My idea was to do an online petition, sending it out to all freestylers around the world, getting various FS organizations involved (like F3 & numerous national federations) and in the end, sending the petition to both Monta AND Red Bull. Seeing as we've got freestylers with good connections in both Monta and Red Bull, I'm sure we can get the petition to the right address.

To the subject of ensuring the ball is manufactured correctly, I have to be honest and say I haven't really thought about it, but having them send out prototypes to a certain group of freestylers seems to be a good idea. Of course, if the whole idea works. :)
www.miranpirner.com
www.youtube.com/MxP23
To learn to succeed, you must first learn to fail.
It's what you do that counts, but it's how you do it which separates you from the rest.
You can't have creativity unless you leave behind the bounded, the fixed, all the rules.

Offline Miran Pirner

  • Moderator
  • APATW & PMATW
  • ****
  • Posts: 2,735
  • Reputation: 4636
    • View Profile
Re: RBSS Monta ball petition
« Reply #3 on: Sep 06, 2011, 07:27: PM »
Is it possible that they make the old type of Monta Shinji?
They changed manufacturers, so who knows?
www.miranpirner.com
www.youtube.com/MxP23
To learn to succeed, you must first learn to fail.
It's what you do that counts, but it's how you do it which separates you from the rest.
You can't have creativity unless you leave behind the bounded, the fixed, all the rules.

Offline Azuuun

  • 360 & NATW
  • **
  • Posts: 181
  • Reputation: 365
    • View Profile
Re: RBSS Monta ball petition
« Reply #4 on: Sep 06, 2011, 07:28: PM »
i basicly tell redbull everytime i meet them: get ridd of monta! use adidas... the arguement i often use is that every football team of redbull have adidas as sponsor.... so why not do the same with freestyle.

and also that Monta doenst keep their words and even their own freestylers turned against them using adidas ball...


Offline Miran Pirner

  • Moderator
  • APATW & PMATW
  • ****
  • Posts: 2,735
  • Reputation: 4636
    • View Profile
Re: RBSS Monta ball petition
« Reply #5 on: Sep 06, 2011, 09:26: PM »
I think the main problem is that Adidas isn't interested...
www.miranpirner.com
www.youtube.com/MxP23
To learn to succeed, you must first learn to fail.
It's what you do that counts, but it's how you do it which separates you from the rest.
You can't have creativity unless you leave behind the bounded, the fixed, all the rules.

Offline iwontpostanymore

  • New Shit
  • ****
  • Posts: 528
  • Reputation: 861
    • View Profile
Re: RBSS Monta ball petition
« Reply #6 on: Sep 07, 2011, 04:33: AM »
its a matter of numbers , if enough freestylers stand up there is nothing they can do to stop us ...but you need ALOT of freestylers
Freestyle Football Federation !

Offline TF

  • Freestyle Moderator
  • PATW & LTATW
  • ****
  • Posts: 1,659
  • Reputation: 2162
    • View Profile
Re: RBSS Monta ball petition
« Reply #7 on: Sep 07, 2011, 04:48: AM »
its a matter of numbers , if enough freestylers stand up there is nothing they can do to stop us ...but you need ALOT of freestylers

Then lets do it!

Offline tbc

  • New Shit
  • ****
  • Posts: 991
  • Reputation: 1091
    • View Profile
Re: RBSS Monta ball petition
« Reply #8 on: Sep 07, 2011, 04:52: AM »
its a matter of numbers , if enough freestylers stand up there is nothing they can do to stop us ...but you need ALOT of freestylers

then lets do it!
i have certain amount of influence in my country. what needs to be done? we make videos?
The nitrophosphate process (also known as the Odda process) was a method for the industrial production of nitrogen fertilizers invented by Erling Johnson in the city of Odda, Norway around 1927.

Offline CalleAhldénFS

  • PATW & LTATW
  • ****
  • Posts: 1,536
  • Reputation: 1007
    • View Profile
Re: RBSS Monta ball petition
« Reply #9 on: Sep 07, 2011, 04:56: AM »
its a matter of numbers , if enough freestylers stand up there is nothing they can do to stop us ...but you need ALOT of freestylers

then lets do it!

Count me in!
Never Give Up!

Offline ASN_Style

  • 360 & NATW
  • **
  • Posts: 150
  • Reputation: 304
    • View Profile
Re: RBSS Monta ball petition
« Reply #10 on: Sep 07, 2011, 07:28: AM »
Maybe The new freestyle company Micheael Hindle is creating could make the balls

Offline ukiFS

  • TATW & LATW
  • ***
  • Posts: 398
  • Reputation: 669
    • View Profile
Re: RBSS Monta ball petition
« Reply #11 on: Sep 07, 2011, 07:36: AM »
how about everyone using his own ball? Is that option possible for rbss?  :017: